Safety Measures at Glance
In order to achieve functional safety for an item it is important to apply relevant risk reduction measures for those hazardous events that have an unacceptable level of risk (which …
Category: Safety
Functional Safety at Glance
Regardless of your industry, if you’re an engineer then I’m pretty sure you’ve encountered the term “Functional Safety” at least once in your career. And I bet you thought at …
Recommendations on ISO 26262 Hazards Analysis Procedure
Introduction As defined in ISO 26262-3 clause 6.4.2.2 the hazards shall be determined systematically based on possible malfunctioning behaviour of the item.These hazards are essentially vehicle level hazards which in …
Impact Speed and a Pedestrian’s Risk of Severe Injury or Death
Introduction Based on the study of AAA Foundation this post shares the summary of the original report that might be downloaded by the link below. The data analyzed in this …
Circuit part FMEA example
What is FMEA? Failure Mode and Effects Analysis – procedure that is standardized by IEC 60812 and required by most of functional safety, quality and reliability standards, part of any …
IQPC Automotive Safety and Security Report 2018
It is an undeniable fact: the complexity of the automotive systems is growing as we speak. With the advent of high automated and autonomous driving, auto engineers are facing new …